<< Click to Display Table of Contents >> Owner's Manual > At the End of the Job - PHD 200

To reduce the possibility of drips when moving the unit, follow these additional steps to ensure that all water is removed from the unit.

NOTICE: To ensure all water is removed from the dehumidifier, the unit will complete the defrost cycle even if the unit is turned off. If the unit is unplugged during the defrost cycle, excessive water may accumulate in the unit and may drip out when you move the unit.

NOTICE: To ensure the condensate tank empties completely while purging, make sure the unit is placed upright on a horizontal surface.

1.Do not turn unit off or move it until it has returned to normal operating mode.

2.Gently rock the machine to ensure any water remaining on interior surfaces falls into the sump area.

3.Press the PURGE key. When the purge cycle is complete, turn the unit off.

4.Remove the external drain hose and drain it carefully.

5.Unplug the power cord.