DrizAir 1200 -  Wiring Check

If the “ER9” error is not displayed, wiring changes may be needed.  Disconnect power to the unit.

1. To confirm if wiring is correct, remove the electrical box panel and remove the screws holding the control panel in place.  Reference the 1200 Wiring Diagrams.  The wiring diagrams are specific to the control panel that was replaced.

2. Rewire as needed, reinstall the electrical box panel, and repeat the pump functionality test.  

If the pump functions properly, go to Reassembling the 1200.  If the pump still does not function properly, contact Legend Brands Service at 800-932-3030.